SUPERPRO/ 6100

Introduction

-As of today, we support 374 manufacturers and 100410 programmable devices

 

-SUPERPRO/6100 intelligent extreme speed programmer/burner/burner, which is up to 30 percent faster than the SUPERPRO 5000 and is applicable to highly sensitive users;

 

-Support up to 256 GBytes files for burning;

 

-144-foot universal drive circuit. Only one adaptor is needed to encapsulate different types of chips within 144 feet. Universal adapter ensures fast new device support.

 

-Directly support 1.2V to 5V various voltage devices.

 

-The more advanced waveform drive circuit guarantees high success rate of burning. With the IC manufacturer's authentication algorithm, both low-voltage devices, second-hand devices and low-quality devices can guarantee extremely high programming rate. The result of programming can choose high and low double voltage check, ensure the result is durable and stable.

 

-In the online mode, the PC is controlled by the USB2.0 port (high speed) control programmer/burner/burner, and the debugging is convenient for research and development; Offline mode programmer/burning/burning, relying on its own CPU, LCD monitor, mobile storage (standard CF card) independence from the PC running, convenient operation, easy to extend, the most suitable for mass production factory site. CF CARDS can store more than 100 engineering files based on capacity.

 

-Automatic detection of chip wrong plug and foot contact, avoid damaging devices.

 

-Improved overcurrent protection function to avoid damaging the programmer.

 

-Rich software functions to simplify operation, improve efficiency, avoid mistakes, and care for users.

 

-Engineering (Project) to the user on the various object device operation, set up, including device model setting and it write file transfer into, configuration Settings, batch commands stored in the Project file, such as every run step into the write operation, effectively reduce the probability of wrong operation

 

-The project files can be used to prevent data leakage. The batch (Auto) command allows the user to organize a single command that is completed in one step at the whim of a common command sequence such as erasing, checking, programming, checking, and encryption

 

-In the mass production mode, once the chip is inserted correctly, the CPU will automatically start the batch command without the manual key. The standard serial number generation and insertion function can be accepted by the user to customize the special sequence number generator.

 

-Log files facilitate quality tracking.

 

-Support Windows XP/Vista/Win7/ Windows 8/Win10 operating system.

 

Specifications

 

Device support: an EPROM, Paged EPROM block, parallel and serial EEPROM, the FPGA configuration serial PROM, (NOR and NAND FLASH memory, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MCU, MCU, device working voltage 1.2 5 v.

 

Package support:DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...

Online communication interface: USB2.0

 

Offline mode: support offline operation

 

Power supply specification: input ac 100-240v, 50/60hz; Output dc 12V/2A power consumption: 15W

 

Host size: 216*148*94 mm; Weight: 1.6kg

 

Packing size: 301*252*145 mm; Packing gross weight: 2.8 kg

 

standard configuration

 

Host, power supply one, USB2.0 cable one, software CD one (include: installation software, user manual electronic edition), warranty card.

 

Optional: adapter

The device update

 

-FLexRobot does not regularly increase programming support for new devices and update software on the web;·

Check the latest device support list;

- Users can download the latest software directly from the Internet

- If it is not convenient to download, you can also get a free software CD, phone 0755-27448110

 

SUPERPRO/7100

Introduction

SUPERPRO ® / 7100 is SUPERPRO ® / 7000 series programming, the new members of the family, and focus on support various types of FLASH memory. Have the following characteristics:

 Enhanced support for eMMC, parallel NAND FLASH, SPI NAND FLASH, serial FLASH/EEPROM, and NOR FLASH, etc.

4 chip parallel programming. Four separate adapters for replacement. 

 

programming speed is extremely high.

USB2.0, LAN, SD interface; USB online, online and offline three modes of work.

 an interface to manage multiple programming machines simultaneously.

 reliability of industrial-grade quality. High cost performance.

 standard configuration

• standard configuration: host one, DC 12V /1.5A power adapter, USB cable one  

 • optional: SD card, FX series adapter. 

The device update

 

-FLexRobot does not regularly increase programming support for new devices and update software on the web;·

Check the latest device support list;

- Users can download the latest software directly from the Internet

 

- If it is not convenient to download, you can also get a free software CD, phone 0755-27448110

SUPERPRO/ 7500

As of today, there are 279 manufacturers and 6,7849 programmable devices.

 

SUPERPRO/7500 is the latest professional intelligent universal programmer/burner/burner for the excellent pedigree of the SUPERPRO family. Relying on Xeltek's powerful device arithmetic library, support number of devices continues to increase; Speed is better, eMMC is up 10 times faster. Support up to 4 chips at the same time; The new tube foot drive technology ensures higher reliability and good yield; USB2.0 and LAN dual communication interface. 

 

The burning speed eMMC device is up 10 times, common NAND is up 1 times, other devices have different amplitude

 

Block NOR/NAND FLASH, serial EEPROM/common devices such as FLASH programming at the same time at most four single chip (depends on device type and packaging), with general programmer/burning/burning, as the price of the production of programming/burning/burning capacity.

 

Support devices include (but not limited to) EPROM, Paged EPROM, parallel and serial EEPROM, FPGA configuration serial PROM, FLASH memory (NOR and NAND,), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MCU, and MCU; Support package including (but not limited to) : DIP, SDIP, PLCC, JLCC, PGA, the LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, mu BGA, CSP, SCSP, QFN, HVQFN,. All adapters are not connected by DIP locking socket, which is more reliable.

 

Strong NAND FLASH platform and project support capability. NAND FLASH supports dozens of mainstream platforms including (but not limited to) Samsung (xsr1.0/1.6), QualComm, HYNIX (HIFFS), MTK(Solution V1.1), ICERA (v1.0/2.0), ST (7162, 7141, etc.), AMLOGIC (if2/0), REALTEK, PICOCHIP, DataLight (FLASH FX Pro), Marvell (310/303/920/935...). , BroadCom, ZTE, Intel (CE4100), UBI, united technologies LEADCORE(L1809OG), MSATR, etc. Rapid user project software customized (cycle 1-10 working days).

 

144-foot universal drive circuit. The same encapsulation of different types of chips within 144 feet generally requires only one adapter. Universal adapter ensures fast new device support.

 

The more advanced ninth tube foot drive technology provides cleaner signals, wider range of voltages, and more precise and higher frequency clocks. To ensure the direct support of Vcc to Vcc to 5V of all kinds of devices, with higher speed and higher yield.

 

Chip safety guarantee mechanism. Built-in precision voltage self-calibration circuit to ensure that the voltage is in the preset accuracy at any time; Diagnose hardware failure at all times and ensure the machine is in good condition. Pre-operation automatic detection of chip wrong insertion, anti-insertion and foot contact; Check the chip ID code before operation.

 

Perfect overpressure, overflows and ESD protection functions to avoid damage to the programmer/burner/burner.

 

Three type of working mode

1)Local mode. Through the USB2.0 port (high speed) and local PC communication, the on-line control is realized.

2)LAN mode. Access LAN for local or remote control;

3)Offline mode. With its own keyboard, LCD monitor and removable memory (standard SD card), it can operate independently, easy to operate, easy to expand and suitable for mass production at factory. Engineering files (quantity only limited by capacity) are created and uploaded to SD CARDS online.

Power outlet booster (optional) improves operation efficiency, reduces fatigue and extends operating life.

 

Powerful software features simplify operation, improve efficiency, avoid mistakes, and care for users.

 

（1）Engineering (Project). The user on the various object device operation, set up, including device model setting and it write file transfer into, configuration Settings, batch commands stored in the project file, such as every run step into the write operation, effectively reduce the probability of wrong operation.

 

（2）Batch (Auto) command. Allows users to erase, check, program, verify, encrypt, and other common command sequences to organize a single command completed in one step.

 

（3）Mass production mode. Once the chip is properly plugged into the socket, the CPU automatically starts the batch command without the manual button. 

（4）dynamic buffer. Each chip can be written with different data, and the software will automatically complete the data changes according to the user's requirements, including the standard and customized serial number generator (such as MAC address, etc.).

 （5）log file and production statistics function. Facilitate quality tracking.

 （6） intellectual property protection. SD card encryption; Engineering document authority management and encryption; Production limits; Remote control.

 （7）expand. Control as many as 12 machines simultaneously through the USB HUB.

 （8）support JAM/STAPL Player and Direct C.

 （9）support almost all known file formats and have automatic file format recognition.

（10） barcode management function. By scanning the bar code on the scan sheet to complete the project file loading and other work, avoid human error.

（11） user special function and algorithm software customized.

Free technical support and free new device support. The general algorithm upgrades the fastest working day. Upgrade software once a day.

 

Support WINDOWS XP/VISTA/WIN7/Win8/Win10 32/64bit.

Specifications

PC communication interface: USB2.0 (high-speed), LAN(100M)

· offline storage media: SD card

· grounding line socket

· keyboard and display: the 6 key membrane keyboard, 20 word X 4 LCD display

· power supply: DC 12 v / 1.5 A. Random distribution power adapter

· host size: 184 x 160 x 78 (mm);Host weight: 0.8kg

· packing size: 310 x 250 x 145 (mm);Packing weight: 1.65Kg

· operating temperature range: 0-40 ° C

· work range of humidity: 20% to 80%

 

 standard configuration

• main engine, power supply one, USB2.0 cable one, software CD (user manual), warranty card.  

• optional: DIP48 lock socket, adapter, SD card 

 

Manufacturer	Device	3968MB (P+V)	1984MB (P+V)	1024MB (P+V)
TOSHIBA	THGBM6D1KBAIL	221s	98 s	52 s
SANDISK	SDIN7DU2-32G	314  s	155 s	56 s
SAMSUNG	KLMCG8GE4A	320 s	158 s	58 s
SAMSUNG	KLMAG4FEKA	318 s	160 s	62 s

 The device update

-FLexRobot does not regularly increase programming support for new devices and update software on the web;·

Check the latest device support list;

- Users can download the latest software directly from the Internet

 

- If it is not convenient to download, you can also get a free software CD, phone 0755-27448110