Extreme speed production series programmer

Extreme speed mass production series programmer, including two models: SUPERPRO/ 6104, SUPERPRO/6104A+

Introduction

-As of today, we support 374 manufacturers and 100410 programmable devices.

-SUPERPRO/6000 speed programmer/burner/burner, which is up to 30 percent faster than the SUPERPRO 5000 and is applicable to highly sensitive users;

-Support up to 256 GBytes files for burning;

-The four independent programming modules are asynchronous, and there is no synchronous waiting time. Each module has a 144-foot universal drive circuit. Only one adaptor is needed to encapsulate different types of chips within 144 feet. Universal adapter ensures fast new device support.

-Directly support 1.2V to 5V various voltage devices.

-The more advanced waveform drive circuit guarantees high success rate of burning. With the IC manufacturer's authentication algorithm, both low-voltage devices, second-hand devices and low-quality devices can guarantee extremely high programming rate. The result of programming can choose high and low double voltage check, ensure the result is durable and stable.

-PC USES the usb 2.0 port (high speed) control programmer/burner/burner,

-Automatic detection of chip wrong plug and foot contact, avoid damaging devices.

-Improved overcurrent protection function to avoid damage to the programmer/burner/burner.

-Rich software functions to simplify operation, improve efficiency, avoid mistakes, and care for users.

-Engineering (Project) to the user on the various object device operation, set up, including device model setting and it write file transfer into, configuration Settings, batch commands stored in the Project file, such as every run step into the write operation, effectively reduce the probability of wrong operation.

-The project files can be used to prevent data leakage. The batch (Auto) command allows the user to organize a single command that is completed in one step at the whim of a common command sequence such as erasing, checking, programming, checking, and encryption.

-In the mass production mode, once the chip is inserted correctly, the CPU will automatically start the batch command without the manual key. The standard serial number generation and insertion function can be accepted by the user to customize the special sequence number generator.

-Software supports WINDOWS XP/Vista/Win7/Win10 operating systems.

Specifications

-Device support: an EPROM, Paged EPROM block, parallel and serial EEPROM, the FPGA configuration serial PROM, (NOR and NAND FLASH memory, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MCU, MCU, device working voltage 1.2 5 v.

-Encapsulation support: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP,SOP,TSOPII, PSOP,TSSOP,SON,EBGA, FBGA, VFBGA,uBGA,CSP,SCSP , ...

-Online communication interface: USB2.0

-Offline mode: unsupported

-Power supply specification: input ac 100-240v, 50/60hz; Output dc 12V/6A power consumption: 15W

-Host size: 438*216*94 mm; Weight: 4.3 kg

-Packing size: - mm; Gross weight: 5.9 kg

standard configuration

Host, power supply one, USB2.0 cable one, software CD one (include: installation software, user manual electronic edition), warranty card.

Optional: adapter

The device update

FLexRobot does not regularly increase programming support for new devices and update software on the web;·

Check the latest device support list;

Users can download the latest software directly from the Internet

If it is not convenient to download, you can also get a free software CD, phone 0755-27448110

SUPERPRO/6104A+

Today, about 400 vendors are supported, and it applies to 100,000 programmable devices.

SUPERPRO/6000 extreme speed production programmer/burner/burner, compared with SUPERPRO 5000:Write speed: increase efficiency by 30%.

The hardware level is higher: the algorithm with IC manufacturer authentication and the advanced waveform drive circuit, strengthen the anti-interference and stability. Extremely high burn rate and reduce the repair of the machine.

Support high capacity chip: support up to 256 GBytes files to burn;

The four independent programming modules are asynchronous, and there is no synchronous waiting time.

Universal drive circuit: each module has a 144-foot universal drive circuit.

General adapter: within 144 feet, with a different type of chip, sharing an adapter.

Device support: universal adapter ensures fast new device support.

Device voltage - directly supports 1.2V to 5V voltage devices.

The more advanced waveform driving circuit ensures the success of the writing.

Both low-voltage devices, second-hand devices and low-quality devices can guarantee extremely high programming rate.

USB2.0 communications -PC controls the programmer/burner/burner through the USB2.0 port (high speed)

Automatic detection of chip wrong plug and foot contact, avoid damaging devices.

Improved overcurrent protection to avoid damage to the programmer/burner/burner

Rich software functions to simplify operation, improve efficiency, avoid mistakes, and care for users. Engineering (Project) to the user on the various object device operation, set up, including device model setting and it write file transfer into, configuration Settings, batch commands such as saving and in the Project file, each time you run a step into the write operation, effectively reduce the probability of wrong operation.

Project file: can set password to prevent data leakage.

The batch (Auto) command allows users to erase, check, program, verify, add, and other common command sequences to organize a single command completed in one step.

In the mass production mode, once the chip is inserted correctly, the CPU will automatically start the batch command without the manual key.

The standard serial number generation and insertion function can be accepted by the user to customize the special sequence number generation

Software supports WINDOWS XP/Vista/WINDOWS 7 operating system.

Support up to 256 GBytes files for burning;

The four independent programming modules are asynchronous, and there is no synchronous waiting time. Each module has a 144-foot universal drive circuit. Only one adaptor is needed to encapsulate different types of chips within 144 feet. Universal adapter ensures fast new device support.

Directly support 1.2V to 5V various voltage devices.

The more advanced waveform drive circuit guarantees high success rate of burning. With the IC manufacturer's authentication algorithm, both low-voltage devices, second-hand devices and low-quality devices can guarantee extremely high programming rate. The result of programming can choose high and low double voltage check, ensure the result is durable and stable.

PC USES the usb 2.0 port (high speed) control programmer/burner/burner,

Automatic detection of chip wrong plug and foot contact, avoid damaging devices.

Improved overcurrent protection function to avoid damage to the programmer/burner/burner.

Rich software functions to simplify operation, improve efficiency, avoid mistakes, and care for users.

Engineering (Project) to the user on the various object device operation, set up, including device model setting and it write file transfer into, configuration Settings, batch commands stored in the Project file, such as every run step into the write operation, effectively reduce the probability of wrong operation.

The project files can be used to prevent data leakage. The batch (Auto) command allows the user to organize a single command that is completed in one step at the whim of a common command sequence such as erasing, checking, programming, checking, and encryption.

In the mass production mode, once the chip is inserted correctly, the CPU will automatically start the batch command without the manual key. The standard serial number generation and insertion function can be accepted by the user to customize the special sequence number generator.

Software supports WINDOWS XP/Vista/WINDOWS 7 operating system.

Specifications

Device support: an EPROM, Paged EPROM block, parallel and serial EEPROM, the FPGA configuration serial PROM, (NOR and NAND FLASH memory, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MCU, MCU, device working voltage 1.2 5 v.

Package support: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP,TSOPII, PSOP,TSSOP,SON,EBGA, FBGA, VFBGA,uBGA,CSP,SCSP , ...

Online communication interface: USB2.0

Offline mode: unsupported

Power supply specification: input ac 100-240v, 50/60hz; Output dc 12V/6A power consumption: 15W

Host size: 438*216*94 mm; Weight: 4.3 kg

Packing size: - mm; Gross weight: 5.9 kg