Universal economic programmer

Including USB interface intelligent speed economic programmer, model is SUPERPRO / 610p

Universal intelligent speed economic programmer, model is SUPERPRO / 611S

SUPERPRO/ 610P

 

 

Product Features

• As of today, support for 240 vendors, 33781 programmable devices.
• SUPERPRO / 610p economy programmer / writer / writer with SUPERPRO / 6000 core, the speed is same with SUPERPRO / 6000,using 48-pin universal driver circuit, supporting devices and SUPERPRO / 500P similar (with the device support list as quasi).
• Unparalleled read and write speed, will surpass SUPERPRO / 500P. writing speed increased by an average of more than 2 to 10 times.
• 48-pin universal driver circuit, compatible SUPERPRO / 500P, 501S adapter.
• Direct support for 1.2V to 5V voltage devices.
• More advanced waveform drive circuit to ensure high writing success rate. With the IC manufacturers certification algorithm, whether it is low-voltage devices, second-hand devices or low-quality devices can ensure high programming yield. Programming results can choose high and low double voltage checking, to ensure lasting results.
• PC through online USB2.0 port (high speed) control programmer / writer / programmer, debugging convenient for research and development.
• ISP function, through the ISP download line to achieve online programming (additional debugging development).
• Automatically detect chip misplug and poor pin contact, to avoid damage to the device.
• Improve the over-current protection function, avoiding to damage the programmer.
• Rich software features streamline operations, improve efficiency, avoid errors, and be user-friendly. Project Saves the user's various operations and settings on the target device, including the device model settings, program file loading, configuration bit settings, batch commands, etc., in a project file for each run Into the write operation, effectively reduce the probability of misuse. Project files can be set password to prevent data leakage. The Auto command allows the user to organize a common command sequence of erase, look-aside, program, verify, encrypt, etc. into a single command that is done in one step at will. Once the chip is correctly inserted into the socket CPU in mass production mode, the batch command is started automatically without manual key presses. Standard serial number generation and insertion capabilities and accepts custom user-specific serial number generator. Log files facilitate quality tracking.
• Support Windows XP / Vista / Win7 / Win10 operating system.

Specifications

Device Support: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory (NOR and NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller,MCU, etc., the device operating voltage 1.2-5V.

Package support: PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP，.

Online communication interface: USB2.0

Offline mode: Not supported

Power Specifications: Input AC 100-240V, 50 / 60HZ; Output DC 12V/2A  Power consumption: 15W

Host size: 178*130*40mm ,weight：-kg

packing size: 320*300*85mm , packing gross weight：1.8kg

Standard configuration

A host, a power supply, a USB2.0 cable, a software CD (including: installation software, user manual electronic version), a warranty card.

Optional: adapter

Device programming example

chip model	Programming + Verification (seconds)	Compare with SP3000U	type
AT28C64B	0.8(P)+0.1(V)= 0.9(s)	1.2(P)+0.8(V)= 2.0(s)	64Kb EEPROM
24AA128	2.7(P)+1.8(V)= 4.5(s)	5.0(P)+4.0(V)= 9.0(s)	128Kb Serial EEPROM
QB25F640S33B60	29.0(P)+14.4(V)= 43.4(s)	55.2(P)+41.4(V)= 96.6(s)	64Mb Serial EEPROM
AT89C55WD	2.5(P)+0.4(V)=2.9(s)	3.3(P)+1.0(V)=4.3(s)	20KB FLASH MCU
S25FL064A	43.9(P)+14.7(V)= 58.6(s)	72.8(P)+41.4(V)= 114.2(s)	64Mb SPI EEPROM
PIC16F876A	10.1(P)+0.8(V)= 10.9(s)	22.1(P)+06.2(V)= 28.3(s)
PIC18F442	5.1(P)+1.1(V)=6.2(s)	13.6(P)+06.7(V)=20.3(s)

Evice Update

FLexRobot occasionally adds programming support for new devices and updates software online.

Check out the latest device support list.

Users can download the latest software directly from the Internet.

If you do not facilitate the download, but also free access to the software CD, phone 0755-27448120.

SUPERPRO /611S

Product Features

• As of today, support 249 manufacturers, 37215 programmable devices.
• SUPERPRO / 611 s economical programmer/writing/programmer, the SUPERPRO / 6000 core , the speed is smae with the SUPERPRO / 6000 , using 48-feet universal driver circuit.
• Unparalleled read and write speed, will surpass SUPERPRO / 500P. writing speed increased by an average of more than 2 to 10 times.
• 48-feet universal driver circuit, compatible SUPERPRO / 500P, 501S adapter.
• Directly support 1.2 V to 5 V voltage devices.
• More advanced waveform drive circuit to ensure high success rate of burning.With the IC manufacturer's authentication algorithm, both low-voltage devices, second-hand devices and low-quality devices can guarantee extremely high programming rate.The result of programming can choose high and low double voltage check, ensure the result is durable and stable.
• On-line mode PC through usb port (high speed) control programmer/burning/burning, debugging convenient for research and development;Offline mode programmer/burning/burning, relying on its own CPU, LCD monitor, mobile storage (standard CF card) independence from the PC running, convenient operation, easy to extend, the most suitable for mass production factory site.CF CARDS can store more than 100 engineering files based on capacity.
• ISP function, through the ISP download line on-line programming (extra debugging development).
• Automatic detection chip fault and tube feet poor contact, avoiding to damage the device.
• Improve the over-current protection function, avoiding to damage the programmer/writer/programmer.
• Rich software features streamline operations, improve efficiency, avoid errors, and be user-friendly. Project Saves the user's various operations and settings on the target device, including the device model settings, program file loading, configuration bit settings, batch commands, etc., in a project file for each run Into the write operation, effectively reduce the probability of misuse. Project files can be set password to prevent data leakage. The Auto command allows the user to organize a common command sequence of erase, look-aside, program, verify, encrypt, etc. into a single command that is done in one step at will. Once the chip is correctly inserted into the socket CPU in mass production mode, the batch command is started automatically without manual key presses. Standard serial number generation and insertion capabilities and accepts custom user-specific serial number generator. Log files facilitate quality tracking.Engineering documentation can increase management authority and output control.
• Support new devices only need to upgrade the software (free).
• Support WINDOWS XP/VISTA/WINDOWS 7 / Win10
• One year quality assurance

specification

devices support: EPROM, Paged EPROM, parallel and serial EEPROM, the FPGA configuration serial PROM, Flash, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU (the device listing shall prevail), device working voltage 1.2 - 5 v.

 

packing support: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, CSP, SCSP,...

 

online communication interface: USB2.0

 

offline mode: support offline operations

 

 power specifications: input AC 100-240V, 50/60 HZ;Output DC 12V/2A   power consumption: 15W

 

 host size: 205 * 148 * 50 mm; Weight: - kg

 

packing size: 320 * 300 * 300 mm;Gross weight: 1.8 kg

 

 

 

The standard configuration

A host, power supply, a usb2.0 cable and one software CD (including electronic user manual), warranty card.

 

Optional matching : adapters, CF card

 

Device programming example

chip model	Programming + check (second)	Compare with SP3000U	Type
AT28C64B	0.8(P)+0.1(V)= 0.9(s)	1.2(P)+0.8(V)= 2.0(s)	64Kb EEPROM
24AA128	2.7(P)+1.8(V)= 4.5(s)	5.0(P)+4.0(V)= 9.0(s)	128Kb Serial EEPROM
QB25F640S33B60	29.0(P)+14.4(V)= 43.4(s)	55.2(P)+41.4(V)= 96.6(s)	64MbSerial EEPROM
AT89C55WD	2.5(P)+0.4(V)=2.9(s)	3.3(P)+1.0(V)=4.3(s)	20KB FLASH MCU
S25FL064A	43.9(P)+14.7(V)= 58.6(s)	72.8(P)+41.4(V)= 114.2(s)	64Mb SPI EEPROM
PIC16F876A	10.1(P)+0.8(V)= 10.9(s)	22.1(P)+06.2(V)= 28.3(s)
PIC18F442	5.1(P)+1.1(V)=6.2(s)	13.6(P)+06.7(V)=20.3(s)

The device update

FLexRobot does not regularly increase programming support for new devices and update software on the web.

Check the latest device support list.

 

Users can download the latest software directly from the Internet.

 

If it is not convenient to download, you can also get a free software CD, phone 0755-27448120.