FAQ
news center
Contact us
-
E-mail: sales@handif.com info@handif.com
Telephone:+86 0755-27448120
24-hour service call:+86 13632652467
The need to be printed circuit board fixed on the printing position, and then by the solder paste printing presses around the scraper or red glue by stencil printing in the corresponding welding plate, PCB for bearing the uniform, through the transmission input to SMT machine automatic patch
Automatic high precision paste printing press
I. product advantage
1. Precise transportation systems
2. Automatic and effective steel net cleaning system
3. Automatic and effective steel net cleaning system
4. Shorten the length of the transportation guide rail in the printed area, and increase the buffer zone in the plate and the plate to improve the production efficiency of the whole line
5. The printing area and the buffer will operate independently, and the printing and access board will be carried out simultaneously, saving time
6. Products for high production speed
simple humanized operation screen
1. Using Windows XP operating software for running support software, it has good operation stability and easy operation for operators, easy to learn and convenient
2. Powerful software functions, including improved 2D detection function and online modification parameters
3. Automatic monitoring, displaying the working status of the equipment, and conducive to monitoring equipment at any time
Performance advantages
1. Effective cleaning structure: dry cleaning, wet cleaning and vacuum three kinds of clear first modes can be programmed and used to achieve perfect cleaning effect
2. Ring high brightness leds, adjustable four road light source combination function, make all kinds of shape mark mark very good identification (including irregular mark mark points), to adapt to the tin plating, copper plating, gold plating, tin, FPC, etc all kinds of different colors of PCB
3. The original flexible holding device and Angle rotation clamp device., guide rail USES the belt transmission PCB, the rate of 1500 mm/S variable speed, can realize arbitrary transmission direction of PCB, PCB supported by magnetic thimble, vacuum suction nozzle fixed device. To meet the requirements of different PCB holding position
4. According to the stencil printing and discharge printing of focus on process requirements and lift the reliability of the design, considering the leakage of solder paste and scraper has certain elastic clamping, squeegee pressure, lifting speed, printing, printing requirements range modify programmable technology, provides the operator with a benign printing control window
5. It is convenient for operators to realize various sizes of steel mesh clamps, plus the effective automatic positioning function of Y to steel network, which can quickly replace the product models in the real production process
6. Unique patent research mark recognition system, according to mark recognition system, read the corresponding bridge with values for each axis coordinate values, using mathematical formula to draw accurate para values, to achieve high precision counterpoint printing, can easily realize 01005 spacing of printing
7. With the circular coaxial light developed by our company, the image processing and mathematical calculation formula are calculated for the image processing and mathematical calculation formula of the tag values generated at the same time and up and down, thus achieving the perfect accurate correction of the upper and lower levels
8. Composed of parts automatic visual printer when printing solder paste, solder paste is thrust by scraper from rolling forward, by thrust can be decomposed to horizontal component and vertical component. When running near the template window, the vertical component of the vertical component makes the paste of the reduced viscosity go smoothly through the window onto the PCB solder. When the platform drops, accurate solder paste is left.
Net frame size: Min Size: 420X500mm Max Size: 737X737mm Thickness: 25~40mm
Minimum PCB size: 50 x50mm
Maximum size of PCB: 400 x300mm
The thickness of the PCB: 0.2 ~ 6 mm
Amount of PCB warp: Max.PCB diagonally 1%
Send highly: 900 + 40 mm
Transfer direction: Left to right; Right to left; Left, left; Right, right
Transportation speed: Max 1500mm/S (programmable)
Location of PCB (supporting mode):Magnetic thimble/adjustable top lift platform
Location of PCB (clamping mode) : Unique top flatten, edge clip, vacuum suction nozzle
Print head: Two independent motors drive the printing head
Scraper speed: 6-300 - mm/SEC
Squeegee pressure : 0 ~ 10 kg/cm2
Blade Angle: 55 ° (standard
Scraper type: Steel scraper standard, glue scraper
Speed of separation of steel net: 0.1~ 20mm/SEC (programmable)
Cleaning method: Dry, wet, vacuum (programmable)
Table adjustment scope: X: + / - 5 mm; Y: + / - 5 mm; Theta: plus or minus 2 °
Repeat positioning accuracy: + / - 0.01 mm
Printing precision: + / - 0.025 mm
Printing cycle: No less than 7s (excluding printing and cleaning)
In line of time: < 5 min
Air pressure: 4.5 ~ 6 kg/cm2
Power supply: AC: 220 + / - 10%, 50/60 hz 1 Φ 3 kw
The control method: Full computer control
dimensions: 1146 (L) X1364 X1440 (W) (H) mm
Machine weight: 1000 kg
PCB transmits the plate height : 35 mm
LED automatic solder paste printing press
Performance advantages
1. This equipment is specifically for the LED lamp plate printing LED automatic solder paste printer, printed circuit board, the machine can maximum size is 1200 * 600 mm, just the LED fluorescent lamp plate makeup can be fully automatic solder paste printing
2. Programmable suspension printing head: two sets of stepper motors are driven, and the front and back squeegee pressure can be adjusted separately to ensure the inconsistency of the front and rear printing due to the fatigue distortion of the blade. Effective control of stroke, improve printing efficiency and prevent the overflow of solder paste
3. Standard stainless steel scraper, unique design, improve blade life
4. The upper vision/lower visual alignment system ensures that the printing is correct
5. Dry/wet/vacuum programmable reticle cleaning system for different sizes of steel mesh
6. The PCB clamping device system is equipped with magnetic thimble and vacuum sucker to ensure the flexible clamping device on the side side of PCB. PCB upper pressure device (especially applicable to PCB below 0.6) - ensure PCB flatness
7. The equipment is suitable for high manual adjustment platform of PCB with different thickness - ensure the best contact between PCB and steel mesh
Performance parameters
Net frame size: Min Size: 737*737mm Max Size: 1500*750mm Thickness: 25~40mm
Minimum PCB size: 80x50mm
Maximum size of PCB: 1200*350mm
The thickness of the PCB: 0.4~ 6 mm
Amount of PCB warp: Max.PCB diagonally 1%
Send highly: 900 + 40 mm
Transfer direction: Left to right; Right to left; Left, left; Right, right
Transportation speed: Max 1500mm/S (programmable)
Location of PCB (supporting mode):Magnetic thimble/adjustable top lift platform
Location of PCB (clamping mode) : Unique top flatten, edge clip, vacuum suction nozzle
Print head: Two independent motors drive the printing head
Scraper speed: 6-200 - mm/SEC
Squeegee pressure : 0 ~ 15 kg/cm2
Blade Angle: 55 ° (standard
Scraper type: Steel scraper standard, glue scraper
Speed of separation of steel net: 0.1~ 20mm/SEC (programmable)
Cleaning method: Dry, wet, vacuum (programmable)
Table adjustment scope: X: + / - 10mm; Y: + / - 10mm; Theta: plus or minus 2 °
Repeat positioning accuracy: + / - 0.015mm
Printing precision: + / - 0.03mm
Printing cycle: No less than 15s(excluding printing and cleaning)
In line of time: < 5 min
Air pressure: 4.5 ~ 6 kg/cm2
Power supply: AC: 220 + / - 10%, 50/60 hz 1 Φ 3 kw
The control method: Full computer control
dimensions: 2220(L)*1200(W)*1500(H)mm
Machine weight: 1500 kg
PCB transmits the plate height : 35 mm
E-mail: sales@handif.com info@handif.com
Telephone:+86 0755-27448120
24-hour service call:+86 13632652467
深圳市汉迪丰科技有限公司 版权所有 ICP备案编号:粤ICP16001872号-3